Medieval helmets are a kind of armor worn by the warriors of the medieval times to protect their heads from most types of injuries and attacks on the head. The head, being a sensitive part of the body, needs to be protected while in the heat of battle, after all. While the warrior must also wear other kinds of armor to fit all over the body, the medieval helm is very important for one’s own protection.
Of course we don’t use these kinds of medieval helmets nowadays, simply because we don’t need that much protection on our heads anymore. The helmets that soldiers wear to war are those that are suited to ward off bullets rather than swords. People who ride or drive motorcycles wear a different kind of helmet for safety purposes while driving. Athletes of a contact sport also sport a certain kind of helmet during competitions to protect their heads from severe injury.
So these medieval helms are not really as useful now as they were before. But this is not to say that they don’t have any value. In fact, many collectors look for these helms because of their historical and aesthetic significance.
Medieval helmets vary in as many ways the medieval swords did, depending on the kind of people that used them. For example, the Crusader Helmet was used by the Crusader, a type of knight who held a higher rank in the medieval times. Unlike most helmets that left most of the wearer’s face open, the Crusader Helmet covered the entire face, leaving only a few holes for breathing and for the eyes to see through. This added protection, however, was at the cost of the wearer’s vision in battle.
On the other hand, the Greco Roman Crest Helmet had a distinct design that the Romans wore during the war. They had brush-like, horsehair crest attached to the top of the helmets, and these helmets were worn by generals and military leaders.
Aside from the fact that they make a great addition to your medieval weapons collection, medieval helmets are ideal for re-enactments and displays.
Japanese swords are those swords which were forged using the sword making traditions of Japan. Their distinction from other sword classes lies in the form of their blade, which is in fact curved and one sided as opposed to other types of swords which are usually sharp on both sides of the blade and is straight. Japanese swords are also meant to be lighter and sharper, since its effectiveness greatly relies of the speed and agility of the one using them.
Back then you really can’t collect Japanese swords much because they were outlawed after the World War II, which meant all forms of productions of Japanese swords were banned and it was illegal for you to have one unless you were a member of the police force or have a government permit. But later on this changed and the laws against production and possession of Japanese swords were amended, thanks to the recognition of the historical and artistic values of these swords. As sword collectors drew closer to the new class of sword collectibles, this brought out a new market in the sword making industry.
This change on the perception of the use of civilian swords has given rise to currently known sword makers like Paul Chen who is now among the best in the creation of modern Japanese swords. He usually creates these swords using the tradition methods of forging so you really get the actual type of swords that were used during the old days. Paul Chen’s sword making career started out when he wanted to add to the antique sword collection of his grandfather. So as early as eight years old, sword forging became his passion. After thirty years of studying with both Chinese and Japanese experts, he finally made his way through the industry to where he is now.
With the Japanese sword making industry on the rise you shouldn’t miss out on the new releases of great Japanese swords from popular forges. Japanese swords will always be a creative, unique and artistic way of adding to your sword collection. These swords are also ideal for those who are teaching themselves to use them.
The double edge sword is probably the most common sword that was carried by knights in the medieval time. You can see a real specimen in the British Museum.
This sword is the real thing, this English sword was probably owned by a very rich man. Visit the British museum and learn more about this amazing weapon.
While toy guns are generally meant for kids, they shouldn’t be the only ones who can have all the fun. It has been a pastime among many professionals as well as other people of all ages to collect replicas of guns that were once used as real weapons. For many people, even those who do not really consider themselves as real collectors or fanatics of replica guns, having these look-alike pieces of the real thing adds either aesthetic or historical value, all depending on who looks and how one looks at it.
For instance, the Texas Rangers Framed set is a replica of the actual props that were used by the stars of Texas Rangers, a movie directed by Steve Miner which revolves around a band of Rangers who were formed a company dedicated to upholding the law around Mexican soil. Since this was a very popular film back in its day, fans have sought memorabilia to have for their own, and among them are these prized replica Western guns.
On the other hand, collections like the Jesse James Collection Framed Set were inspired by both the movie and the factual bases of the character, Jesse James, who was an American outlaw known for his notorious for his exploits during the Civil War. Regardless of whether he was a hero or a criminal, he was well known nonetheless. He also had a brother named Frank James with whom he shared his glory as well as the Frank & Jesse James Boxed Set.
Other replica guns are sought for not because they were part of some famous film but simply because of their unique model, such as that of the Sheriff’s Framed Set, which is actually a type of gun used by law enforcers in the Wild West.
But in short, replica guns are indeed a mentionable item for all sorts of collectibles. Despite the strict regulations on shipping even non-firing guns, Old West pistols like the Wyatt Earp Collector’s Classic remain in demand for many buyers. They come complete with frames and boxes as well as accessories such as posters to best suit the collector’s tastes.
I have been quite busy lately which is why i haven’t had time to update. You see i just sold my house and i need to pack everything to get ready and move to the new house. This is no big problem it is just annoying…(i hate moving)…
The biggest problem i have so far is how am i gonna move mo whole sword collection??? That is one problem i never though about until i got in the room with my boxes…My collection is something i really do love and i take extra care of each swords in it, the last thing i want to do is to scratch any of them during the move..
I hired some professional to help me move, but i don’t think i will let any of them get even close to these swords..now i need to figure out a way to pack each swords and each display stand in a way that will keep them intact….
Any ideas?
There are many kinds of replica swords, ranging from movie swords to historical models. These replicas have a variety of purposes and even though the main one is to have something to put on display, they can also be added to sword or weapon collections or in some cases be used as a real weapon if the sword is battle ready. Regardless of what kinds of replica swords you are interested in, it is easy enough to find the right ones because there are so many available on the market. It is especially useful to go look through websites that sell swords since many have good replicas and you can get an idea of what is available.
Replica swords from movies make up a large number of the models that are for sale. Many movies with a large fan base had swords in them, among them Lord of the Rings swords, the Samurai 3000 collection and 300 spartan weapons. All replicas from movies should come with an official license so that you can be sure of getting the “one and only” genuine piece, but furthermore replica swords should also come with a certificate of authenticity. Those that collect replicas should also keep an eye out for limited or special editions, since they are the rarest and most valuable swords.
Another main group of replica swords are those that are based on real swords from famous warriors or which were used during certain eras or wars. Examples of such swords include those like the replica of William Wallace’s, aka Braveheart, sword or the Samurai Shogun swords, as well as Civil War officer’s swords or Scottish swords. All can be used for specific collections, but even on their own make great displays.
Since almost all replica swords are not functional, they are not as dangerous to keep around a home as battle ready swords would be. However, that does not mean that they are completely safe and therefore they should still be kept on wall plaques or mounted in racks where they are easily seen but not touched by those that should not be playing with swords, such as children. Non-functioning swords should also only be shown and not used since they are not capable of withstanding impact or cutting through tough objects without breaking.
During China’s long history many groups were proud of their swords and worked hard at creating the perfect bladed weapon and designing swords for different purposes. This effort is easily seen just by looking at all the different kinds of Chinese swords that are available. There are swords of all shapes and sizes which makes it easy to find the right weapon, but at the same time that variety will also make choosing just one of the many Chinese swords difficult.
Due to the variety of Chinese swords that there is, these make great weapons for many kinds of collections. A sword from a particular dynasty will fit in perfectly with a collection of other items from the time period, but Chinese swords are also great additions to any sword or weapon collection in general, as well as martial art equipment displays. On top of that, they are great for enhancing any Chinese styled décor in a home and are eye-catching for all to see.
In general, many Chinese swords are fully functioning weapons and can be used as such. These battle ready swords have high carbon steel blades that come with a sturdy handle, hilt, pommel and wrapping, as well as engravings or other embellishments. These swords are handmade and forged with claying methods that make strong, flexible blades which are sharpened and can then be used to hit, slash or cut through objects. This is also why Chinese swords are often used for demonstrations, but also for martial arts competitions that still use swords.
Several of the martial arts disciplines that originated in China eventually require that sword techniques must be learned. Chinese swords are often seen in sports such as Kung Fu and the design of the swords is what makes them so popular among those that need to use them. Generally speaking, Chinese swords are lightweight and styled so that the holder can have a good grip on the weapon and not be slowed down by it at all. There are also many kinds of styles to choose from, such as hook swords, butterfly swords, dual swords, dadao, jian and nandao. Therefore a sword can be found that is suitable for all body types, strengths and preferences.
If you are new to sword collecting, there is a small chance that you have never heard of Paul Chen.
Paul Chen is known around the world by sword collectors and martial arts practitioners as one of the best sword smith for those looking for high quality swords at affordable prices.
Who is Paul Chen?
Paul Chen started is company back in 1997 were he specialized in forging replica of the Edo period Japanese swords. All of the swords were forged using only traditional methods. His company instantly became a huge success simply because he was offering high quality swords at great prices.
He soon expanded in manufacturing Chinese and European swords as well.
If you are interested in learning a little bit more about Paul Chen swords, read the following article i have written for you.
Article: Paul Chen Swords are Great Values
I am often asked what is the the tang of a sword and what are the difference between the various types of tang. So in order to get that information to you i decided to write this little article.
What is the Tang of a Sword?
The Tang of a sword is the part of the blade that goes through the handle. Then handle in turn is attached to it.
There are different types of tang, here is a little resume that will help you understand each of them.
- Full Tang:The strongest of them all, swords with full tang are considered to be very solid constructions. The Full tang terms mean that the grip follows the exact shape of the tang which is a solid piece of steel. The handle was then attached to this part using various methods.
- Hidden Tang:This type of tang is also called rat-tail tang, This technique results in a much weaker type of sword. A Rat tail or hidden tail can be described as a thin, round bar of steel with a threaded end is welded to the blade shoulder. While this technique is often used to produced very effective and solid knives, it cannot be used to produced battle read-swords. the sword being a completely different weapon requires a full tang to endure the stress of use. Swords with Rat-tail tang are often considered as decorative swords.
- Sub tang:This type of sword is the exact reason why you need to know how to differentiate the various types of Tang. a sub tang is described as a very short piece of metal (less than an inch) that is inserted in the grip or handle. It is then fixed to the grip with epoxy. This technique is used to produce cheap swords in great quantities while reducing the amount of metal required. This type of weapon is for display only, any use of these type of sword is considered extremely dangerous.
There you go, now that you know what the various types of tang are, go get yourself a real sword and improve your collection 
A battle ready sword is one that has sharpened edges and that is made of materials strong enough to withstand the impact of being hit with another weapon. One of the most popular materials for the metal used to make the blade of such a sword is high carbon steel. Not just the blade is important, but also the hilt, handle and pommel. There are many people who would be better off purchasing a battle ready sword instead of something else, because this weapon will last longer and be suitable for a fight.
Role playing fans are one of the groups who should invest in a battle ready sword. Although these are real weapons, a medieval fight display or battle between good and evil will require that swords be swung and hit each other. Even if not struck with full force, it is still enough to break many swords and a battle ready sword will be able to absorb this and the blade will not be damaged or even broken. Fortunately, there are many makes and models of battle ready swords so no matter what the manner of role playing is or the theme, there will surely be a sword that looks good for the purpose.
Battle ready swords are also important for martial artists to have. On the one hand a ready to use sword with a blade of high carbon steel is lighter and a light easier to swing, but on the other hand it will also not break during a competition or practice training as long as the opponent is using a sword of similar quality and materials.
Those that just love swords and want to practice on their own should also invest in a battle ready sword instead of one made of stainless steel or another metal o lower quality. It can be fun to set up targets to strike at, but then the right ones should be chosen so that the high carbon steel blade of a sword is not damaged or marred in any way. The best choices would be objects made of bamboo or also rice mats.